| PNC | Part code | Title | Quantity | Information |
i |
|---|
| 110 | | BLOCK,ENG(SERVICED BY GOODWRENCH ENGINE)(REF TO PART 1) | | |
| 301 | 22532158 | VALVE,HTR WAT FLOW CONT(16MM, ONE DIRECTION FLOW VALVE)(ACDelco #15-5372) | 01 |
|
| 302 | 22539278 | BOLT,HFH,M6X1X25,HDR PT,10.9,PS(ENG WAT OTLT ADAP) | 06 |
|
| 303 | 10137646 | SENSOR,ENG COOL TEMP(W/ENG COOL T/GA SEN & TEMP IND SW) | 01 |
|
| 303 | 10137646 | SENSOR,ENG COOL TEMP(W/ENG COOL T/GA SEN & TEMP IND SW) | 01 |
|
| 304 | 14090039 | ADAPTER,ENG WAT OTLT(USE 444625 PLUG W/ LN2 APPL.)(IF OTR SENSOR HOLE CHANGES FROM 3/8-18 TO 1/8-27,DEALER WILL HAVE TO PROCURE LOCALLY PIPE ADAPTER TO MATE WITH 3/8 SWITCH/SENSOR) | 01 |
|
| 305 | 24577299 | THERMOSTAT,ENG COOL(195 DEG, W/SEAL)(ACDelco #131-122) | 01 |
|
| 306 | 10112356 | OUTLET,WAT(ACDelco #15-1569) | 01 |
|
| 307 | 14090038 | STUD,WAT OTLT(M6X1X12.5,M6X1X14.1)(0.724) | 03 |
|
| 308 | | NUT,WAT OTLT | | |
| 309 | 24575060 | GASKET,ENG WAT OTLT ADAP(1.153) | 01 |
|
| 310 | 14084945 | PLUG,1/4-18X0.56,STEEL,PC(ENG BLK COOL DRN HOLE)(ACDelco #14084945) | 02 |
|
| 311 | 22568674 | HOSE,RAD INL | 01 |
|
| 311 | 10154057 | HOSE,RAD INL(**VPI 1-877-846-8243) | 01 |
|
| 312 | 11570383 | CLAMP,SPRINGBAND, 24 NOMINAL DIA, 15 THK, STL, GMW14083(HTR INL HOSE ENG) | 02 |
|
| 313 | 10112377 | INLET KIT,WAT(REQUIRES GASKET 10103563)(ACDelco #15-1809) | 01 |
|
| 314 | 11570082 | BOLT,HFH,M8X1.25X22,19 THD,18 OD,10.9,GMW3359(WAT INL)(ACDelco #11570082) | 02 |
|
| 315 | 10103563 | GASKET,WAT INL(ACDelco #251-2013) | 01 |
|
| 316 | 25536321 | PIN,DWL 1/4"X 1/2"(ENG FRT CVR LOC) | 02 |
|
| 317 | 10101275 | GASKET,W/PMP(ACDelco #251-2010) | 01 |
|
| 318 | 88926237 | PUMP KIT,WAT(ACDelco #252-723)(ALL MAKES) | 01 |
|
| 318 | 88926237 | PUMP KIT,WAT(ACDelco #252-723)(ALL MAKES) | 01 |
|
| 318 | 12462265 | PUMP KIT,WAT(W/GSKT)(INCLS BRG, GSKT, HSG, HUB, IMPELLER & SEAL)(ACDelco #251-609) | 01 |
|
| 319 | | BOLT,W/PMP | | |
| 320 | 24576031 | PULLEY,W/PMP(ACDelco #24576031) | 01 |
|
| 321 | 11515755 | BOLT,HEX,M8X1.25X16,15 THD,18 O.D.,10.9,7114M(W/PMP PUL)(T/W 12345493 REPLCS 25534835) | 03 |
|
| 322 | 00120394 | WASHER,FL,13/32 I.D.,13/16 O.D.,1/16 THK,ZN(CR/SHF PUL) | 03 |
|
| 323 | 11504595 | BOLT,CR/SHF PUL(M10X1.5X20,10.9,POR)(HEX, STEEL)(8.900) | 02 |
|
| 324 | 10184919 | BOLT,CR/SHF PUL HUB(M12X1.5X50) | 01 |
|
| 325 | 12594364 | WASHER,FLAT, 0.45" ID, 1.75" OD, 0.31" THK, SAE 1010 STL, GMW3044(CR/SHF PUL HUB) | 01 |
|
| 326 | 10112371 | PULLEY,CR/SHF(LESS HUB)(BALANCED PULLEY)(ACDelco #10112371) | 01 |
|
| 327 | 14062705 | HUB,CR/SHF PUL(LESS PULLEY) | 01 |
|
| 328 | 14090906 | SEAL,CR/SHF FRT OIL(PART OF 330)(61.57/61.37 MM O.D.)(ACDelco #296-21) | 01 |
|
| 329 | | BOLT,ENG FRT CVR | | |
| 330 | 14090022 | COVER,ENG FRT(CR/CASE)(INCLS 328,331)(INCLS COVER, SEALS & STUD) | 01 |
|
| 331 | 14090026 | SEAL,ENG FRT CVR(PART OF 330)(ACDelco #14090026) | 01 |
|
| 334 | 14090038 | STUD,OIL PAN(USED @ 2 FRT O/PAN CORNER LOCATIONS)(M6X1X12.5,M6X1X14.1)(0.724) | 02 |
|
| 335 | 24577118 | SEAL,ENG COOL THERM(W/O LIP, 48.25MM OD)(PART OF 305)(ACDelco #24577118) | 01 |
|
