| PNC | Part code | Title | Quantity | Information |
i |
|---|
| 1 | | SEAL, Evaporator Core | | |
| 2 | | BAFFLE, Air | | |
| 3 | | CLAMP, Heater Core | | |
| 4 | | HOUSING, Heater Temperature Valve | | |
| 5 | | VALVE ASM, Heater Temperature | | |
| 6 | | CONNECTOR, Link (Plastic) | | |
| 7 | | LINK, Rod | | |
| 8 | | SWITCH ASM, Thermo Elect (Capillary) | | |
| 9 | | CASE, W/Cut-Off Asm, Evap & Blower-Upr | | |
| 10 | | TUBE, Blower Motor Cooling | | |
| 11 | | FAN ASM, Blower Motor | | |
| 12 | | MOTOR ASM, Evaporator Blower | | |
| 13 | | TERMINAL, Blower Motor Ground | | |
| 14 | | NUT, Hex (#10-32) | | |
| 15 | | ORIFICE, Blower Inlet | | |
| 16 | | LINK, Connector Adjuster | | |
| 17 | | LEVER, Heat Control | | |
| 18 | | VALVE, W/Fitting Asm, Air Inlet | | |
| 19 | | ACTUATOR, Air Inlet Valve | | |
| 20 | | GASKET, Module Mounting | | |
| 21 | | CASE, Inlet & Distributor-W/Fitting | | |
| 22 | | PLUG, Case Seal | | |
| 23 | | SEAL, Link Opening | | |
| 24 | | CLIP, Heater Core Mounting | | |
| 25 | | CORE, Heater-W/Fittings | | |
| 26 | | SEAL, Core Tubes | | |
| 27 | | COVER, Drain | | |
| 28 | | CASE, Evap & Blower-Lower | | |
| 29 | | BRACKET, Evap Support Tube | | |
| 30 | | SEAL, Evap Outlet Tube | | |
| 31 | | SEAL, Evap Inlet Tube | | |
| 32 | | CLAMP, Hose | | |
| 33 | | ACCUMULATOR, Refrigerant | | |
| 34 | | CLAMP, Accumulator | | |
| 35 | | CLAMP, Accumulator Tube | | |
| 36 | | GASKET, "O" Ring (3/4") | | |
| 37 | | CORE ASM, Evaporator | | |
| 38 | | CLAMP, Pipe (1/2") | | |
| 39 | | ORIFICE, W/Gasket, Evap Core | | |
