| PNC | Part code | Title | Quantity | Information |
i |
|---|
| 1 | | BOLT, Hex (5/16x18x7/8) | | |
| 2 | | WASHER, Lock (5/16) | | |
| 3 | | RETAINER ASM, Main Drive Gear Bearing (Incl #7) | | |
| 4 | | GASKET, Main Drive Gear Bearing Retainer | | |
| 5 | | GEAR, Main Drive (Clutch) | | |
| 6 | | ROLLER, Mainshaft Front Pilot to Main Drive Gear | | |
| 7 | | SEAL ASM, Main Drive Gear Bearing | | |
| 8 | | RING, Main Drive Gear Bearing Retaining | | |
| 9 | | RING, Main Drive Gear Bearing Locating | | |
| 10 | | BEARING ASM, Main Drive Gear | | |
| 11 | | PLUG, Case Filler/Drain (1/2x14) | | |
| 12 | | CASE ASM, Transmission | | |
| 13 | | GASKET, Extension | | |
| 14 | | EXTENSION ASM, Trans Rear | | |
| 15 | | WASHER, (7/16) | | |
| 16 | | VENT ASM, Trans Extension | | |
| 17 | | BOLT, Hex (7/16x14x1 1/8) | | |
| 18 | | BUSHING, Trans Extension | | |
| 19 | | SEAL ASM, Extension Oil | | |
| 20 | | RING, Synchronizer Retaining | | |
| 21 | | RING, Synchronizer Blocking | | |
| 22 | | SPRING, Trans Synchronizing | | |
| 23 | | KEY, Synchronizing-1st & Rev & 2nd & 3rd | | |
| 24 | | SYNCHRONIZER ASM, Trans-1st & Rev & 2nd & 3rd | | |
| 25 | | GEAR, Second Speed | | |
| 26 | | SHAFT, Trans Main | | |
| 27 | | GEAR, First Speed | | |
| 28 | | GEAR, Reverse | | |
| 29 | | WASHER, Reverse Gear-Flat (1 3/16 ID x 2 13/32 OD) | | |
| 30 | | WASHER, Reverse Gear-Wavey (1 7/32 ID x 1 27/32 OD) | | |
| 31 | | RING, Rear Bearing Locating | | |
| 32 | | BEARING, Main Shaft-Rear | | |
| 33 | | CLIP, Speedo Drive Gear | | |
| 34 | | RING, Rear Bearing Snap (.089 Thick) | | |
| 35 | | GEAR, Speedo Drive | | |
| 36 | | WASHER, Counter Gear Thrust | | |
| 37 | | WASHER, Counter Gear Shaft Retaining | | |
| 38 | | ROLLER, Counter Shaft Gear | | |
| 39 | | GEAR, Counter Shaft | | |
| 40 | | SHAFT, Counter Gear | | |
| 41 | | KEY, Woodruff (1/8x5/8) | | |
| 42 | | GEAR, Reverse Idler (W/Bushing) | | |
| 43 | | RING, Retaining (3/4) | | |
| 44 | | SHAFT KIT, Reverse Idler | | |
| 45 | | FORK, Gearshift-1st & Rev & 2nd & 3rd | | |
| 46 | | RING, Retaining (5/16) | | |
| 47 | | SHAFT ASM, Shifter-1st & Rev | | |
| 48 | | PIN, Detent Cam Retaining | | |
| 49 | | WASHER, Lock (5/16) | | |
| 50 | | BOLT, Hex (5/16x18x3/4) | | |
| 51 | | SEAL, 1st & Reverse Shift | | |
| 52 | | LEVER, Trans Shifter Shaft Control | | |
| 53 | | LOCK, Shift Lever | | |
| 54 | | BOLT, Hex (3/8x16x7/8) | | |
| 55 | | SEAL, 2nd & 3rd Shift | | |
| 56 | | COVER, Case | | |
| 57 | | CAM, Gearshift Detent | | |
| 58 | | SPRING, Gearshift Detent Cam | | |
| 59 | | SHAFT ASM, Shifter-2nd & 3rd | | |
| 60 | | GASKET, Trans Cover | | |
