PNC | Part code | Title | Quantity | Information |
i |
---|
1 | | GEAR, Strg P/S | | |
2 | | CLAMP, Inter Strg Shf Coupling Seal | | |
3 | | CLAMP KIT, Inter Strg Shaft Coupling Clamp | | |
4 | | SCREW, Tap (M6.3 x 1.81 x 20) | | |
5 | | SHIELD, Strg Shf Coupling | | |
6 | | SHAFT, Strg Inter | | |
7 | | COLUMN, Strg | | |
8 | | BOLT (3/8"-24 x 1 3/16") | | |
9 | | BRACKET, Strg Column Guide | | |
10 | | NUT (3/8"-16) | | |
11 | | COVER, Strg Column Shf Link | | |
12 | | LEVER, W/Knob, Tilt Wheel Cont | | |
13 | | COVER, Inst Panel Strg Col | | |
14 | | SCREW, Tap (M4.2 x 1.41 x 20) | | |
15 | | BOLT, Hex (#8-1 1/4" x 12) | | |
16 | | NUT (#10 x 1 1/2") | | |
17 | | BRACKET, Col Supt | | |
18 | | SCREW (M6.3 x 1.81 x 20) | | |
19 | | BOLT (7/16"-20 x 1 5/8") | | |
20 | | CLAMP, Lower Coupling | | |
21 | | NUT, Hex (7/16"-20) | | |
22 | | SPACER, Strg Gear | | |
23 | | SHIELD, Strg Shf Coupling Lower | | |
24 | | WASHER, Flat (.460 x 1.12 x .180) | | |
25 | | BOLT (7/16"-14 x 4") | | |
26 | | NUT, Hex (7/16"-20) | | |
27 | | PIN, Cotter (3/32" x 1") | | |
28 | | WASHER, Lock | | |
29 | | NUT, Strg Gear | | |
30 | | LINKAGE, Strg (See Exploded View 6.000 Group) | | |
31 | | NUT (3/8"-16) | | |
32 | | GEAR, Strg | | |
33 | | BOLT (3/8"-16 x 3 11/16") | | |
34 | | WASHER (3/8" ID x 1" OD) | | |
35 | | WASHER, Flat (.460 x 1.12 x .180) | | |
36 | | BOLT (7/16"-14 x 4") | | |
37 | | NUT (3/8"-16) | | |
38 | | SHIELD, Strg Shf Coupling Upper | | |
39 | | RETAINER | | |
40 | | NUT (7/16"-20) | | |
41 | | NUT (1/4"-14) | | |
42 | | COLUMN, Strg | | |
43 | | KNOB, Hazard Warning | | |
44 | | SPRING, Hazard Warning | | |
45 | | BUTTON, Hazard Warning | | |
46 | | SCREW, Tap (M3.5 x 1.27 x 22) | | |
47 | | LEVER, W/Knob Asm, Dir Signal | | |
48 | | SCREW (M4.2 x 1.41 x 20) | | |