| PNC | Code de pièce | Titre | Quantité | Information |
i |
|---|
| 1 | 15087886 | ANTENNA,RDO(M6 X 1.0 -6H THREAD)(INCLUDES TORQUE WRENCH FOR INSTALLATION)(ACDelco #15087886) | 01 |
|
| 2 | 22549794 | NUT,RDO ANT CBL(ACDelco #22549794) | 01 |
|
| 3 | 14103464 | BUMPER,HOOD SI | 02 |
|
| 4 | 12508586 | BEZEL,RDO ANT(FRA,NLD,YGO) | 01 |
|
| 4 | 22583156 | BEZEL,RDO ANT(**VPI 1-877-846-8243) | 01 |
|
| 6 | 22576914 | HOOD, | 01 |
|
| 7 | 10093446 | BOLT,HOOD HGE(3.5MM SHLD)(8.015)(**VPI 1-877-846-8243) | 02 |
|
| 8 | 22577202 | HINGE,HOOD(**VPI 1-877-846-8243) | 01 |
|
| 8 | 10115391 | HINGE,HOOD(**VPI 1-877-846-8243) | 01 |
|
| 9 | | NUT,HOOD HGE(PART OF 20,33) | | |
| 10 | 00480534 | RETAINER,F/FDR INSL (PUSH IN)(BLACK) | 02 |
|
| 11 | 22584562 | INSULATOR,F/FDR(**VPI 1-877-846-8243) | 01 |
|
| 11 | 22584563 | INSULATOR,F/FDR(**VPI 1-877-846-8243) | 01 |
|
| 12 | 22545467 | BOLT,ENG SPH SHLD(FRT SHLD TO BODY)(M4.2X1.4X16.0) | AR |
|
| 13 | 22551455 | SHIELD,ENG SPH(**VPI 1-877-846-8243) | 01 |
|
| 13 | 22565299 | SHIELD,ENG SPH(TO LWR SI RL)(**VPI 1-877-846-8243) | 01 |
|
| 14 | 11570082 | BOULON À TÊTE HEXAGONALE À ÉPAULEMENT,M8X1.25X22,19 FILETAGE,18 DIAMÈTRE EXTÉRIEUR(ACDelco #11570082) | AR |
|
| 15 | 22598788 | INSULATOR,HOOD | 01 |
|
| 16 | 20064875 | DISPOSITIF DE RETENUE, À POUSSOIR, ,20.5MM DE LONG, ,42.76MM, TÊTE DE 1.68 DE DIAMÈTRE, PLASTIQUE | AR |
|
| 17 | 22598618 | PANEL,FRT W/H(**VPI 1-877-846-8243) | 01 |
|
| 17 | 22598619 | PANEL,FRT W/H(**VPI 1-877-846-8243) | 01 |
|
| 18 | 12337915 | RIVET,FRT W/H PNL | AR |
|
| 19 | 11501812 | VIS,TÊTE DE RONDELLE HEXAGONALE CANNELÉE,M8-1.25X20,18.25 DIAM. EXTÉR. ACIER,ZINC | AR |
|
| 20 | 12353172 | FENDER,FRT(INCL 9)(**VPI 1-877-846-8243)("IT MAY BE NECESSARY TO ENLARGE FENDER TO MOTOR COMPARTMENT RAIL ATTACHING HOLES TO ACHIEVE PROPER FENDER ALIGNMENT.") | 01 |
|
| 21 | 22592022 | MOLDING,F/FDR CTR RR(**VPI 1-877-846-8243) | 01 |
|
| 21 | 22592023 | MOLDING,F/FDR CTR RR(**VPI 1-877-846-8243) | 01 |
|
| 22 | 10180421 | VIS,TÊTE DE RONDELLE RONDE AVEC NYLON NOIR RONDELLE,4.2X 1.41X13,11 DIAM. EXT.,POINT DE PERÇAGE,6172,PE | AR |
|
| 23 | 12330155 | MOLDING KIT,RKR PNL | 01 |
|
| 23 | 12330154 | MOLDING KIT,RKR PNL(**VPI 1-877-846-8243) | 01 |
|
| 24 | 15656027 | VIS, HWH, AVEC ENDUIT D'ÉTANCHÉITÉ, M4.2X1.41X16,8.9 DIAMÈTRE EXTÉRIEUR .,6172M,BO(8.900) | AR |
|
| 25 | 12368063 | HORN KIT,A NOTE(450 HZ)(MAY REQUIRE 19116451 WIRE ASM)(INCLUDES BRKT)(ACDelco #D1925C) | 01 |
|
| 25 | 12368064 | HORN KIT,F NOTE(380 HZ)(MAY REQUIRE 19116451 WIRE ASM)(INCLUDES BRKT)(ACDelco #D1922C) | 01 |
|
| 26 | 22579922 | LATCH KIT,HOOD SECD(KIT CONTAINS SECONDARY HOOD LATCH, LATCH SUPT & INSTR SHEET)(KIT CONTAINS SECONDARY HOOD LATCH, LATCH SUPT & INSTR SHEET) | 01 |
|
| 27 | 11515756 | BOULON,TÊTE HEXAGONALE AVEC EMBASE, M8X1.25X20,17FILET,18 DIAMÈTRE EXTÉRIEUR.,10.9,7114M | AR |
|
| 28 | 10081897 | GÂCHE,LOQ PRIM CAPOT(**VPI 1-877-846-8243) | 01 |
|
| 29 | 10135544 | BRACE,F/FDR(LWR FRT)(**VPI 1-877-846-8243) | 01 |
|
| 29 | 10135545 | BRACE,F/FDR(LWR FRT)(**VPI 1-877-846-8243) | 01 |
|
| 30 | 11588711 | BOULON À TÊTE HEXAGONALE À ÉPAULEMENT, FILETAGE 6X1X16, 10, 14.2 DE DIAM EXT, 8.8 ACIER, GMW3359 | AR |
|
| 31 | 22636582 | SHIELD,ENG SPH(TO LWR SI RL)(**VPI 1-877-846-8243) | 01 |
|
| 33 | 12353171 | FENDER,FRT(INCL 9)("IT MAY BE NECESSARY TO ENLARGE FENDER TO MOTOR COMPARTMENT RAIL ATTACHING HOLES TO ACHIEVE PROPER FENDER ALIGNMENT.") | 01 |
|
| 34 | 16515223 | CAPSULE,HDLP(*01)(**VPI 1-877-846-8243) | 01 |
|
| 34 | 16515224 | CAPSULE,HDLP(*01)(**VPI 1-877-846-8243) | 01 |
|
| 36 | 22595300 | EXTENSION,FRT BPR FASCIA(BLACK)(**VPI 1-877-846-8243) | 01 |
|
| 37 | 14103442 | SHIELD,FRT W/H SPH | 01 |
|
| 37 | 14103441 | SHIELD,FRT W/H SPH | 01 |
|
| 38 | 10115378 | MOLDING,FRT BPR FASCIA(BLACK)(CUT AS REQ'D)(**VPI 1-877-846-8243) | 01 |
|
| 39 | 10046800 | FASCIA,FRT BPR(LOW GLOSS BLACK FINISH ON UPR AREA OF FASCIA--RADIATOR AIR LWR BAFFLE WAS ELIMINATED INTERIM 1993,ATTACHMENT TABS MAY BE BROKE OFF IF NOT REQ'D.)(PAINT TO MATCH)(PRIMER IS 30 GLOSS ACCENT AND DOES NOT REQUIRE PRE-PREP BEFORE PAINTING-ONLY LIGHT SANDING, IF DESIRED) | 01 |
|
| 40 | 14093088 | RETAINER,FRT BPR FASCIA (PUSH IN)(OTR SUPT)(NYLON)(8.153) | AR |
|
| 40 | 14093088 | RETAINER,FRT BPR FASCIA (PUSH IN)(TO BPR IMP BAR)(UPR)(NYLON)(8.153) | 04 |
|
| 41 | 10134424 | EMBLEM,FRT GRL("BOWTIE")(**VPI 1-877-846-8243) | 01 |
|
| 42 | 22577970 | GRILLE,FRT(BLACK)(**VPI 1-877-846-8243) | 01 |
|
| 43 | 22572700 | BRACKET,HDLP HSG PNL SUPT(AT RAD SI SUPT) | 02 |
|
| 44 | 14093099 | BRACKET,HDLP HSG PNL(**VPI 1-877-846-8243) | 01 |
|
| 44 | 14093100 | BRACKET,HDLP HSG PNL(**VPI 1-877-846-8243) | 01 |
|
| 45 | 22581453 | PANEL,HDLP HSG | 01 |
|
| 45 | 22593722 | PANEL,HDLP HSG | 01 |
|
| 46 | 14083269 | BRACKET,HDLP HSG PNL SUPT(CTR LWR) | 02 |
|
| 47 | 16509258 | BRACKET,HDLP MT PNL(**VPI 1-877-846-8243) | 01 |
|
| 47 | 16509257 | BRACKET,HDLP MT PNL | 01 |
|
| 49 | 14100756 | RETAINER,HOOD SEAL(**VPI 1-877-846-8243) | 02 |
|
| 50 | 20351035 | BOLT,W/CON AND SEALING WA,M6X1X25,21 O.D.,9.8,PZOR | AR |
|
| 51 | 10077999 | SEAL,HOOD RR OTR | 02 |
|
| 52 | | SCREW,MLDG(4.2 X 20MM) | | |
| 53 | 12508578 | MOLDING,F/FDR WHL OPG(RR)(FIN,NOR,YGO,ESP)(**VPI 1-877-846-8243) | 01 |
|
| 53 | 12508579 | MOLDING,F/FDR WHL OPG(RR)(FIN,NOR,YGO,ESP)(**VPI 1-877-846-8243) | 01 |
|
