| PNC | Код детали | Наименование | Количество | Информация |
i |
|---|
| 1 | | BOLT, Hex (5/16x18x7/8) | | |
| 2 | | WASHER, Lock (5/16) | | |
| 3 | | RETAINER ASM, Main Drive Gear Bearing (Incl #7) | | |
| 4 | | GASKET, Main Drive Gear Bearing Retainer | | |
| 5 | | GEAR, Main Drive (Clutch) | | |
| 6 | | ROLLER, Main Shaft Bearing | | |
| 7 | | SEAL ASM, Main Drive Gear Bearing | | |
| 8 | | RING, Main Drive Gear Bearing Retaining | | |
| 9 | | RING, Main Drive Gear Bearing Locating | | |
| 10 | | BEARING ASM, Main Drive Gear | | |
| 11 | | PLUG, Case Filler/Drain (1/2x14) | | |
| 12 | | CASE ASM, Transmission | | |
| 13 | | GASKET, Extension | | |
| 15 | | WASHER, Lock (7/16) | | |
| 16 | | VENT ASM, Trans Extension | | |
| 17 | | BOLT, Hex (7/16x14x1 1/8) | | |
| 18 | | BUSHING, Trans Extension | | |
| 19 | | SEAL ASM, Extension Oil | | |
| 20 | | RING, Synchronizer Retaining | | |
| 21 | | RING, Synchronizer Blocking | | |
| 22 | | SPRING, Trans Synchronizing | | |
| 23 | | KEY, Synchronizer-1st & 2nd & 3rd & 4th | | |
| 24 | | SYNCHRONIZER ASM, Trans-3rd & 4th | | |
| 25 | | GEAR, Trans 3rd Speed | | |
| 26 | | SHAFT, Trans Main | | |
| 27 | | GEAR, Trans 2nd Speed | | |
| 28 | | SYNCHRONIZER ASM, Trans-1st & 2nd | | |
| 29 | | GEAR, Trans 1st Speed | | |
| 30 | | WASHER, Reverse Gear-Flat | | |
| 31 | | WASHER, Reverse Gear-Wavey | | |
| 32 | | RING, Rear Bearing Locating | | |
| 33 | | BEARING, Mainshaft-Rear | | |
| 34 | | CLIP, Speedo Drive Gear | | |
| 35 | | RING, Rear Bearing Snap (.089 Thick) | | |
| 36 | | GEAR, Speedo Drive | | |
| 37 | | WASHER, Counter Gear Bearing Thrust | | |
| 38 | | WASHER, Counter Gear Shaft Retaining | | |
| 39 | | ROLLER, Counter Shaft Gear | | |
| 40 | | GEAR, Counter Shaft | | |
| 41 | 03859006 | SHAFT, Counter Gear | |
|
| 41 | | SHAFT, Counter Gear | | |
| 41 | 03859006 | SHAFT, Counter Gear | |
|
| 42 | | KEY, Woodruff (1/8x5/8) | | |
| 43 | | GEAR ASM, Reverse Idler | | |
| 44 | | SHAFT, Reverse Idler | | |
| 45 | | FORK, Gearshift-1st & 2nd | | |
| 46 | | RING, Retaining (3/4) | | |
| 47 | | SHAFT ASM, Gearshift-1st & 2nd | | |
| 48 | | SHAFT ASM, Reverse Shift | | |
| 49 | | BALL, Reverse Detent (3/8) | | |
| 50 | | SPRING, Reverse Shift Lever Detent Ball | | |
| 51 | | PIN, Dowel (3/16x3/8) | | |
| 52 | | COVER, Case | | |
| 53 | | WASHER, Lock (5/16) | | |
| 54 | | BOLT, Hex (5/16x18x3/4) | | |
| 55 | | LEVER, Reverse Shaft Outer | | |
| 56 | | WASHER,(3/8 ID x 3/4 OD) | | |
| 57 | | WASHER, Lock (3/8) | | |
| 58 | | BOLT, Lock (3/8x16x7/8) | | |
| 59 | | LOCK, Shifter Shaft Control Lever | | |
| 60 | | LEVER, Shifter Shaft Control | | |
| 61 | | SEAL, Gearshift-1st & 2nd & Rev | | |
| 62 | | SEAL, Gearshift-3rd & 4th | | |
| 63 | | PIN, Detent Cam Retaining | | |
| 64 | | CAM, Gearshift-1st & 2nd Detent | | |
| 65 | | SPRING, Gearshift Detent Cam | | |
| 66 | | CAM, Gearshift-3rd & 4th Detent | | |
| 67 | | SHAFT ASM, Gearshift-3rd & 4th | | |
| 68 | | FORK, Gearshift-3rd & 4th | | |
| 69 | | GASKET, Trans Cover | | |
